• EM-D1 rackmount receiver
• SK-D1 bodypack transmitter
• ME 2 clip-on microphone
• NT-12 power supply
• Transport Case
• User Manual

Specifications :

SK D1

• Microphone 50 to 20,000 Hz 
• 2.2 V RMS 
• Weight approx. 85 g 
• RF output power adaptive, up to 100 mW (country-specific) 
• Battery Specification 2 x AA size battery (1,5V) 
• Input impedance 1 MΩ 
• Connection 3.5 mm jack socket, lockable 
• Line 20 to 20,000 Hz 
• 3.3 V RMS 
• Input sensitivity automatic sensitivity adjustment 
• Accupack BA 30 (Li-Ion, 3.7V) 

ME 2

• Microphone pre-polarized condenser 
• Max. sound pressure level 130 dB SPL 
• Pick-up pattern omni-directional 
• Sensitivity 20 mV/Pa 

System

• THD, total harmonic distortion typ. < 0,1 % 
• Storage temperature – 20 °C to +70 °C (The temperature range is influenced by the battery characteristics) 
• Operating temperature – 10 °C to +55 °C 
• Signal-to-noise ratio ≥ 105 dB (A) 
• RF frequency range 2,400 to 2,483.5 MHz 
• Modulation GFSK with back channel 
• Dynamic range > 135 dB (A) 
• Audio sampling 24 bit/48 kHz 
• Transmission method TDMA, time diversity, frequency diversity, fast switching antenna diversity 
• Latency 3.9 ms 
• Audio codec APT-X Live 
• AF frequency response 20 to 20.000 Hz 

EM D1

• Weight approx : 824 g 
• Audio output : Mic/line level switch –24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu 
• RF output power back channel : 10 mW/100 mW (country-specific) 
• Power supply : 12 V DC hollow jack 
• Antenna connector : 2 x Rev-SMA 
• Current consumption : 350 mA 
• Low-cut filter : –3 dB at 120 Hz 
• RF sensitivity : <-90 dBm 
• Connection XLR : /¼” (6.3 mm) jack 
• Equalizer : 7-band graphic equalizer 
• Automatic gain control (AGC) : compression/expansion with automatic make-up gain function 
• Display OLED 
• Network socket : RJ45 
• Network protocol : Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6